Click on a picture or link to start

MAIN PAGES

DTSystems Front Page
Catalogue and Prices
Catalog and Prices USA
Ordering
Auction Goods
Terms & Conditions
Site Map
Links

DIALUP INFORMATION

**NEW** Dialup
Dialup Homepage
What is a Telephone Dialup?
How does It Work?
Are They easy To Fit?
How Many can Listen?
Frequently Asked Questions
TDS1 Instruction Manual
TDS1 Installation
TDS2 Instruction Manual
TDS2 Installation
TDS2 Why Two Lines?
Remote Indicator
Remote Control
Prices

DIALUP DIAGRAMS

Telephone Line Layout
Basic Installation
Attenuator Layout
Connections Diagram
Mains Supply Wiring

OTHER

Inductive Loop Systems
Sound Systems
HiFi Section
Environmental Section
PC Setup Advice
Downloads
TDS1 Single Line Telephone Dialup System TDS2 Double Line Telephone Dialup System (2 shown) Remote Control Installation (TDS2)
 

OK I'm Convinced - What do I do?

First of all, you need to decide whether to install a single (TDS1) or preferably double (TDS2) line Dialup unit at the venue. Some reasons for opting to install the double line unit are given here. Having decided on the type of Dialup, you need to provide corresponding telephone lines, one for a TDS1 and two for the TDS2. However, depending upon your own circumstances, you may already have some telephone lines available that can be used more efficiently.

For example, you might already have a telephone or Fax line that could be shared with the Dialup or you might have a building alarm system with an ICB (Incoming Calls Barred) line that is ONLY used whenever the venue is EMPTY. Using this line, you could gain effectively a free line to use the Dialup in manual mode during times when the alarm is switched off. Using the existing telephone line might seem to be undesirable on the grounds of public safety. However virtually everyone has their own mobile telephone these days so a dedicated land line is just unecessary.

You can now install your system. Since this is SO easy, you can even do this for temporary or single events. Installation consists of plugging the Dialup into a telephone socket (exactly the same as plugging in a telephone), connecting either a signal lead or speaker wire into the venue sound system, plugging into the mains supply and throwing a switch - easy!

For a full technical description of how to install the Dialup system, see the appropriate installation handbooks - TDS1....TDS2.

That's it!! It really IS that easy to fit and operate.

We hope you found the site interesting, well presented and above all, informative. Thanks for visiting and please feel free to link to us or recommend us to others.

pad
website security,tds,dialup,system,choose,dtsystems
    © 1994-2018 DTSystems. All Rights Reserved.
    Designers and Manufacturers of Electronic Equipment.
Dialup Systems (Original Version),tds,dialup,system,choose,dtsystems
Home | Prices | Contact | Terms | Site Map | Dialup Systems (Original Version)